Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh and analytical
Standards Australia
Sets out the following three dissolution methods for the determining average mass or coating thickness; strip and weigh (dissolution of coating), strip and weigh (dissolution of basis metal), and analytical.
RECONFIRMATION NOTICE
Technical Committee MT-009 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 20 March 2017.
The following are represented on Technical Committee MT-009:
Australasian Institute of Surface Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Steel Institute
Bureau of Steel Manufacturers of Australia
Galvanizers Association of Australia
Galvanizing Association of New Zealand
New Zealand Metal Roofing Manufacturers
This Standard sets out the following three methods for the determination of the average mass or thickness of metallic coatings on small items:
(a) Method A—Strip and weigh (dissolution of coating).
(b) Method B—Strip and weigh (dissolution of basis metal).
(c) Method C—Analytical.
These methods are suitable for measuring the average thickness, or mass, of coatings on small items where it is impracticable to measure the local thickness as described in AS 2331.1.1, AS 2331.1.2, AS 2331.1.3 or AS 2331.1.4.
The methods are suitable for routine control purposes where a more critical local thickness measurement is not required.
The methods are capable of an accuracy of ±5%.
The methods are generally limited to items or a collection of items that weigh not more than 200 g.
NOTE: The test procedures described in this Standard do not necessarily include all of the precautions required to satisfy health and safety aspects. Care should be taken to ensure that the procedures are carried out only by people who have received suitable training. Guidance in the handling and use of hazardous chemicals is given in AS/NZS 2243.1 and AS/NZS 2243.2.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 07/04/2017. This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017 |
| Committee | MT-009 |
| Supersedes |
|
