AS 1774.19-2003 (R2013)

Table of Contents

1 -  AS 1774.19-2003 REFRACTORIES AND REFRACTORY MATERIALS-PHYSICAL TEST METHODS - THE DETERMINATION OF SIEVE ANALYSIS AND...
1 -  PREFACE
1 -  METHOD
1 -  1 SCOPE
1 -  2 APPLICATION
1 -  2.1 Wet sieve analysis (water)
1 -  2.2 Wet sieve analysis (alcohol)
1 -  2.3 Dry sieve analysis
2 -  3 REFERENCED DOCUMENTS
2 -  4 DEFINITIONS
2 -  5 PRINCIPLE
2 -  5.1 Moisture content
2 -  5.2 Sieve analysis
2 -  6 SAFETY
2 -  7 APPARATUS
2 -  7.1 Drying oven
2 -  7.2 Balance
2 -  7.3 Test sieves
2 -  7.4 Shaking device
2 -  7.5 Brushes for cleaning sieves
3 -  7.6 Water spray jet
3 -  7.7 Alcohol
3 -  7.8 Alcohol spray jet
3 -  8 SAMPLE PREPARATION
3 -  9 PROCEDURES
3 -  9.1 Moisture content
3 -  9.2 Wet sieving with water
4 -  9.3 Wet sieving with alcohol
4 -  9.4 Dry sieve analysis
5 -  10 CALCULATIONS
6 -  11 PRECISION DATA
6 -  12 REPORTING OF RESULTS
7 -  APPENDIX A - EXPLANATION OF INTERLABORATORY STUDY
7 -  A1 SAMPLE PREPARATION
7 -  A2 DETERMINATION STUDY
7 -  A3 RESULTS

Abstract

Sets out procedures for determining the sieve analysis of refractory materials. The Standard also specifies a method for determining the moisture content.

RECONFIRMATION NOTICE
Technical Committee MN-007 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 4 April 2013.
The following are represented on Technical Committee MN-007:

Australasian Institute of Mining and Metallurgy
Australian Ceramic Society
Bureau of Steel Manufacturers of Australia
Cement Industry Federation
CSIRO Manufacturing & Materials Technology
Institute of Refractories Engineers
Refractories Manufacturers Association of Australia
The University of New South Wales


To view or download a copy of the reconfirmation notice please go to the reconfirmation link near the top of this page.

Scope

This Standard describes procedures for determining the sieve analysis of refractory materials. It also describes a method for determining the moisture content.

General Product Information

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 16-07-2013
Pages
ISBN
Committee	MN-007
Supersedes	AS 1774.19-1978 DR 02510 CP