Full Description

WARNING Persons using ISO 13163 should be familiar with normal laboratory practice. ISO 13163 does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.

IMPORTANT It is absolutely essential that tests conducted according to ISO 13163 be carried out by suitably trained staff.

ISO 13163 specifies the determination of lead-210 (²¹⁰Pb) activity concentration in samples of all types of water using liquid scintillation counting (LSC). For raw and drinking water, the sample should be degassed in order to minimize the ingrowth of 210Pb from radon-222 (²²²Rn).

Using currently available liquid scintillation counters, this test method can measure the ²¹⁰Pb activity concentrations in the range of less than 20 mBq l^-1 to 50 mBq l^-1. These values can be achieved with a counting time between 180 min and 720 min for a sample volume from 0,5 l to 1,5 l.

Higher ²¹⁰Pb activity concentrations can be measured by either diluting the sample or using smaller sample aliquots or both.

It is the laboratory's responsibility to ensure the suitability of this test method for the water samples tested.

Cross References:
ISO 5667-3
ISO/IEC Guide 98-3:2008
ISO 11929
IEC Guide 99
GUM:1995
ISO 80000-10
IEC 17025
ISO 5667-14
CD 13164-2
ISO 17294-2
ISO 18589-2
ISO 3696
ISO 11885
ISO 5667-1
ISO 15586
FD T90-112
CD 13164-3
ISO 6107-2


Incorporates the following:
Corrigendum, August 2019

Product Details

Published: 10/31/2013 ISBN(s): 9780539024395 Number of Pages: 26 File Size: 1 file , 1.4 MB Same As: ISO 13163:2013 Product Code(s): 30383586, 30383586, 30383586 Note: This product is unavailable in United Kingdom